
The trouble with beads is not finding them, it is narrowing them down. A single supplier can list thousands, sorted by nothing more useful than colour. It helps to know that almost all of the types of beads you will meet fall into a small number of families, and that each family behaves differently once it is on a thread. This guide sets out those families and what each one is actually good for.
Glass beads
The largest group by far, and the most varied. Glass takes any colour, holds it permanently, and can be pressed, blown, wound or cut. Czech pressed glass gives you crisp repeatable shapes at low cost. Lampwork beads are wound by hand over a flame, so each is slightly different. Glass is heavier than it looks, which matters on a long necklace, and it will chip if two beads knock together on a hard surface.
Seed beads
Tiny uniform glass beads, sized by a number that runs backwards: an 11/0 is smaller than an 8/0. They are the raw material of bead weaving, where hundreds of them build up into a fabric rather than a strand. Buy more than you think you need and buy it all at once, since dye lots vary and a top-up rarely matches.
Gemstone beads
Natural stone drilled and polished, sold by the strand. Every strand differs, because the stone does. They carry real weight, which gives a piece a satisfying hang but also strains a weak thread. Softer stones such as turquoise are often stabilised with resin before drilling, so ask what you are buying if it matters to you.
Metal beads
Sterling silver, fine silver, brass, copper and plated base metal. Metal beads do the structural work in a design: they separate, punctuate and finish. Plated beads look identical to solid ones on day one and quite different after a year of wear, so it is worth knowing which you have. Solid metal beads can also be made rather than bought, which is covered further down.
Spacer beads
Small, plain and unglamorous, and the reason good designs look considered. A spacer sits between two feature beads to give them room, control the spacing along a strand, and stop larger beads from grinding against each other. Rondelles, discs and tiny rounds all do this job. Leaving them out is the single most common reason a homemade strand looks crowded.
Focal beads and pendants
The one piece a design is built around. A focal is larger, or a different material, or simply the only one of its kind on the strand. One per piece is usually the limit — two focals compete and neither wins.
Wood, clay and resin beads
Light, warm to the touch and inexpensive. Wood suits large-scale pieces that would be unwearably heavy in stone or glass. Polymer clay beads can be made at home in a domestic oven and take patterns that no other material will. Neither is durable in the way metal is, and neither likes water.
Which types of beads suit which project?
Match the material to the wear. Something worn daily wants metal or hard stone. A statement piece worn occasionally can afford glass or resin. A woven cuff needs seed beads and nothing else. And whatever the strand is made of, choose the stringing material for the heaviest bead on it, not the average one.
Making your own gives you one bead nobody else has. The same approach makes small silver charms, and rolling the clay over texture sheets before shaping it is the simplest way to get a surface that looks deliberate rather than hand-squeezed.
Making your own beads and charms
Solid silver beads, tube spacers and small pendants can be made at home with silver clay. It is a soft clay carrying fine silver particles, which you roll, cut and shape by hand, dry, then fire with a small torch. The binder burns off and the piece that remains is 99.9% fine silver — not plated, not filled. It shrinks by roughly 8–10% during firing, so a bead is made slightly oversized, and any hole is made slightly larger than the wire that will pass through it.
A hand-made focal bead on a strand of bought beads is a good way to start, because the piece is small and the rest of the design carries it. Our guide to using silver clay covers shaping, drying and firing in order, and the silver clay starter kit includes the clay, torch, tools, cubic zirconia and instructions for a first piece. Orders ship worldwide with duties covered, so the price you see is the price you pay.
Beads are strung rather than fitted, so the hardware matters less here than it does for earrings, where the post or hook has to suit both the style and the piercing — our guide to the types of earrings sets out which fitting goes with which style, and doubles as a plain-English glossary of jewellery terms. If the beads are headed for a necklace, the necklace length chart is the quicker way to settle how long the finished strand should be.